ATOM
ATOM SEMI
Ideal for OEM semiconductor manufacturers needing value control in a limited space, featuring advanced connectivity, reliability, and Copy…
1 / 9
ATOM Three Phase Power Controller
Ideal when space is limited but performance still matters. A strong fit for OEMs and smaller systems that still require precise control and reliability.
EtherCAT
A high-speed, real-time Ethernet protocol designed for motion control and industrial automation.
EtherNet/IP
An industrial Ethernet communication protocol used for real-time automation and factory control systems.
Modbus TCP
A simple industrial communication protocol used to connect PLCs, sensors, meters, and automation devices.
PROFINET
An industrial Ethernet standard used for communication between controllers and automation equipment.
100kA SCCR
Indicates the device can safely withstand up to 100,000 amps of short-circuit current.
CE
Indicates the product complies with European Union safety, health, and environmental requirements.
FCC
Confirms the product meets electromagnetic interference standards in the United States.
Product Information
ATOM is an ultra-compact, low cost, microprocessor-based power controller to assist with control of AC or DC loads.
ATOM is available in three models varying in connectivity:
- Analog
- Digital (Ethernet/IP, ModbusTCP, or PROFINET)
- EtherCAT
For ATOM Three Phase controllers, resistive or transformer-connected loads can be controlled in multiple ways, including SSR On/Off Relay, Zero Cross, or Fast Zero Cross. Output is controlled linearly and can be set to the average or RMS value of the voltage or current.
ATOM Three Phase controllers offer the following features:
- 2 SCR (3-phase 2-leg configuration)
- Auto-ranging voltage circuitry to enable main supply voltage (45-65 Hz)
- 24-600 VAC for UL/cUL
- 24-600 VAC for CE
- Robust design for continuous full-frame current operation without derating, up to 122°F [50°C], 6000 ft [1829 m] altitude
- 24 Vdc power source to supply control electronics and maintain critical communications
- Control setpoints through standard analog or optional digital fieldbus interfaces
- Analog control
- Standard: 0-5 VDC, 4-20 mA setpoints
- Field Scalable: 0-10 VDC, 0-20 mA.
- On/Off Relay Mode: 0, 4-32 Vdc
- Status LEDs and an LED bar graph to quickly monitor operating status
- Plug-n-play USB-C interface and free Control Panel software
- Ability to easily duplicate controller settings for multiple controllers
OEM options may be available upon factory consultation.
Dimensions shown in inches (mm)
16A
16A
16A
32A
32A
32A
50-80A
50-80A
50-80A
Specifications
| Phase | Three |
| Firing Mode |
Zero Cross Fast Zero Cross |
| Output | AC |
| Amp Sizes | 16A, 32A, 50A, 80A |
| Voltage |
24-600 VAC (CE) 24-600 VAC (UL) 45-65 Hz |
| Control | Analog or Digital |
| Feedback Modes |
Feed-forward Voltage RMS Current On/Off Relay mode Proportional (Open Loop) |
| Feedback Type |
Voltage Current |
| Limits |
Voltage Current (adjustable) |
| Alarms |
Overtemp Shorted SCR Overcurrent Trip Partial Load Fault Phase Loss |
| Additional Features |
Missing cycle detection Sync-Guard (digital models only) Trans-Guard |
| Mean Time Between Failures (MTBF) | >50,000 hours |
| Line Frequency (Auto Ranging) | 45-65 Hz |
| Frame Current Ratings (Amps) | Continuous RMS (AC): 16A, 32A, 50A, 80A |
| Current Rating – Peak Surge | 15x frame rating for 10 ms |
| Minimum Hold/Latch Current | 500 mA |
| Max Leakage Current | 1.2 mA @ 600 Vac 50/60 Hz |
| SCR Rating (PIV) | 1600 V peak forward & reverse |
| Fusing | Optional external Class T, branch-rated, touch-safe fusing |
| Thermal | Integrated thermal sensor |
| Current Limit (optional) | 20 – 105% |
| Power Dissipation | 1.3 W per amp of load current per phase |
| Controller Input Power (DC) | 24 Vdc (+10 / -15%) |
| DC Power Consumption |
3 to 7 W *Frame dependent, see User Manual for detail |
| Setpoint Resolution | 10k |
| Internal Control Loop Resolution | 32k |
| Output Resolution | 30k @ 50 Hz, 25k @ 60 Hz |
| Response Time | Adjustable from 50 ms to 2 s |
| Voltage | 5.0% of line voltage |
| Current | 5.0% of frame rating |
| Output Linearity | 4.0% from (5 – 100%) output range |
| Accuracy | (+10% / -15%) line voltage change will result in a max output change of 2% from (5 – 100%) output range |
| Temperature Drift | Output shall not change greater than 1% per degree C max over the operating temperature range from (5 – 100%) output range |
|
Surrounding Air Operating Temp |
32 to 122°F [0 to 50°C] *Deration for proximity placement may apply |
| Humidity | 20% to 90% RH Non-condensing |
| Rated Operating Altitude | Up to 6000 ft [1829 m] at full rated current |
| Contaminates |
RoHS Compliant CE Pollution Degree 2 (only non-conductive pollution occurs) |
| Storage Temperature | -4 to 176°F [-20 to 80°C] |
Downloads
| Manuals and Brochures | |
|---|---|
| ATOM Three Phase Datasheet | Download |
| ATOM User Manual | Download |
| ATOM Troubleshooting Guide | Download |
| ATOM Alarms Troubleshooting Guide | Download |
| ATOM vs. MicroFUSION | Download |
| CAD Blocks | |
|---|---|
| ATOM Three Phase 16A CAD Block | Download |
| ATOM Three Phase 32A CAD Block | Download |
| ATOM Three Phase 50-80A CAD Block | Download |
| Quickstart Guides | |
|---|---|
| ATOM Three Phase 16-80A Analog Quickstart Guide | Download |
| ATOM Three Phase 16-80A Digital Quickstart Guide | Download |
| ATOM Three Phase 16-80A EtherCAT Quickstart Guide | Download |
| Software and Fieldbus Files – EtherNET/IP, PROFINET, Modbus TCP, EtherCAT | |
|---|---|
| Control Panel Software | Download |
| ATOM EtherNet/IP EDS | Download |
| ATOM GSDML | Download |